What Size Rims for 33 Inch Tires: Ideal Fitment and Wheel Size Explained

For 33-inch tires, suitable rim sizes range from 15 to 22 inches. Recommended widths are 15×8 for off-roading or 17×9 for comfort. Wider rims improve stability. Tire size can vary by manufacturer, affecting fit and performance. Always check your vehicle’s compatibility before making a choice.

The width of the rims plays a crucial role as well. A rim width of 8 to 10 inches is generally suitable for 33 inch tires. This width supports the tire’s sidewalls and helps maintain stability during acceleration and cornering. Proper rim size enhances both traction and handling, making the driving experience more enjoyable.

Choosing the right size rims for 33 inch tires not only influences vehicle performance but also affects aesthetics. Larger rims can provide a more aggressive look, while smaller rims may contribute to a more classic appearance.

In selecting rims, consider the offset and backspacing. These attributes affect how the wheels fit within the wheel wells. A correct selection will optimize performance and prevent potential interference issues. Next, we will explore the importance of offset and backspacing when choosing rims for your tires.

What Are the Recommended Rim Sizes for 33 Inch Tires?

The recommended rim size for 33-inch tires is typically between 15 to 20 inches in diameter.

1. Common Rim Sizes:
   – 15 inches
   – 16 inches
   – 17 inches
   – 18 inches
   – 20 inches

2. Factors Influencing Rim Size:
   – Type of Vehicle (e.g., truck, SUV)
   – Intended Use (e.g., off-road, street)
   – Tire Profile (aspect ratio)

3. Rim Width Range:
   – 8 inches
   – 9 inches
   – 10 inches

Considering these points will help determine the best rim size for optimal performance and safety.

1. Common Rim Sizes:
   Common rim sizes for 33-inch tires range from 15 to 20 inches. The most frequent size found in aftermarket options is 17 inches. According to Tire Rack, a 17-inch rim paired with 33-inch tires usually offers a good balance of handling and comfort. Additionally, 15-inch rims provide better off-road capability due to increased sidewall height, thus enhancing stability on rough terrains. Conversely, larger rims such as 20 inches can improve aesthetics and handling on pavement but may compromise ride comfort on uneven surfaces.

2. Factors Influencing Rim Size:
   The type of vehicle significantly affects the recommended rim size. Trucks and SUVs designed for rough use often accommodate larger rims, while smaller vehicles might benefit from lower-profile setups. Intended use also plays a role; off-road enthusiasts often choose smaller, wider rims for better traction, while street drivers might prefer larger rims for improved handling. Tire profile, or aspect ratio, is another vital factor. A lower profile tire improves responsiveness but can lead to a harsher ride.

3. Rim Width Range:
   Rim width for 33-inch tires generally varies from 8 to 10 inches. Wider rims generally enable a larger contact patch with the ground, improving traction. For example, an 8-inch wide rim suits most general driving needs, while a 10-inch rim can be beneficial for off-road applications where tire deformation is expected. According to a study by the Tire Industry Association in 2021, the combination of rim width and tire aspect ratio directly impacts vehicle performance and stability.

How Do Different Tire Widths Affect Recommended Rim Sizes?

Different tire widths directly influence the recommended rim sizes due to their impact on performance, safety, and vehicle handling. Wider tires generally require wider rims to maintain optimal tire shape and performance.

1. Tire curvature: Wider tires have a more flattened profile when mounted. This shape requires a wider rim to support the tire adequately. According to Tire Rack, a tire’s contact patch—the part that makes contact with the road—becomes larger with increased width, improving traction.

2. Aspect ratio: Aspect ratio refers to the height of the tire’s sidewall compared to its width. As tire width increases, the aspect ratio typically decreases for performance tires. This change can alter the handling characteristics and requires an appropriate rim width to ensure stability and responsiveness.

3. Load distribution: Wider tires distribute load differently. A wider rim allows the tire to maintain its intended shape under load, especially during cornering. A study by the Society of Automotive Engineers (SAE) highlighted that improper rim sizing could lead to uneven tire wear and decreased performance.

4. Air pressure: Tire manufacturers specify air pressure settings based on tire width and rim size. Wider tires on narrower rims may require higher pressure to avoid sidewall flex, which could lead to tire failure. This is emphasized by the National Highway Traffic Safety Administration, which notes that maintaining correct tire pressure is essential for safety and performance.

5. Compatibility: Each tire width has a recommended rim width range. For example, a tire width of 245 millimeters typically requires a rim width of 7 to 9 inches. Using rims outside this range can affect handling and lead to potential tire damage. Guidelines from the Tire And Rim Association provide specific sizing recommendations to ensure compatibility and performance.

Selecting the correct rim width based on tire width is critical for safety, stability, and effective vehicle handling.

Why Is Tire Profile Important When Choosing Rim Size?

Tire profile is important when choosing rim size because it significantly affects vehicle performance, handling, and safety. The tire profile refers to the height of the tire’s sidewall as a percentage of its width. It directly influences how a tire fits onto a rim and impacts factors like ride comfort, stability, and traction.

The definition of tire profile and its importance can be found in the guidelines published by the Tire and Rim Association (TRA). The TRA establishes industry standards for tire sizing, including the profile aspect, to ensure optimal performance and safety.

The importance of tire profile when selecting rim size can be broken down into several key points:

1. Fitment: The tire and rim must be compatible in size. A mismatched fit can lead to tire blowouts or decreased traction.
2. Handling: A lower profile tire (short sidewall) typically enhances cornering stability, while a higher profile tire absorbs road imperfections better.
3. Ride Quality: Tires with different profiles can alter the comfort level of a ride. Higher profiles generally provide a softer ride.
4. Traction and Performance: The sidewall height can affect how much of the tire’s contact patch is on the road, influencing grip.

In technical terms, tire profile relates to two measurements: aspect ratio and rim diameter. The aspect ratio is the height of the sidewall divided by the width of the tire, expressed as a percentage. For instance, a tire marked as 225/50 R16 has a width of 225 mm and a height that is 50% of that width. The rim diameter, indicated by the last number (in this case, 16 inches), represents the size of the wheel that the tire fits onto.

Detailed explanations of tire-rim interactions include how sidewall stiffness affects handling characteristics. A stiffer sidewall typically results in better steering response but less cushioning over bumps. Conversely, a softer sidewall may increase comfort but can lead to less precise handling.

Specific conditions that contribute to tire profile importance include vehicle type and intended use. For example, sports cars benefit from low-profile tires for enhanced handling, while SUVs may utilize higher profiles for better off-road capability and comfort. Choosing the appropriate tire profile based on these factors ensures that the vehicle performs optimally under various driving conditions.

What Factors Should Be Considered When Selecting Rim Size for 33 Inch Tires?

The selection of rim size for 33-inch tires is crucial for optimal performance and safety.

Key factors to consider include:
1. Vehicle compatibility
2. Tire width
3. Desired ride quality
4. Handling characteristics
5. Off-road performance
6. Aesthetic preferences
7. Weight considerations

Understanding these factors enhances the decision-making process when selecting rim size.

1. Vehicle Compatibility: Vehicle compatibility refers to the ability of the rim to fit the specific make and model of the vehicle. Each vehicle has specifications that dictate the minimum and maximum allowable rim sizes. According to TireRack, proper fitment ensures that the tire mounts securely without rubbing against suspension components or the body of the vehicle.

2. Tire Width: Tire width is measured in millimeters and significantly affects the required rim size. Wider tires typically require wider rims. A common guideline is that the rim width should be approximately 70-90% of the tire width to ensure proper fit and performance. For example, a tire width of 11.5 inches would pair well with a rim width of 8.5 to 9.5 inches.

3. Desired Ride Quality: Desired ride quality influences the chosen rim size, as larger rims typically lead to a firmer ride due to reduced sidewall height. A larger rim can improve cornering and handling but may reduce comfort on rough terrain. Research from the University of Michigan indicates that changing rim sizes can alter suspension dynamics and overall ride feel.

4. Handling Characteristics: Handling characteristics are affected by rim size and can vary based on driving conditions. Larger rims often improve steering response and cornering performance. However, they can also increase the risk of damage from potholes or rough surfaces, as noted by Consumer Reports.

5. Off-road Performance: Off-road performance can be significantly impacted by rim size. Smaller rims with larger sidewalls provide better absorbing ability over rough terrain. Conversely, larger rims can make the vehicle more stable at higher speeds but may sacrifice some off-road capability. According to a study by the Jeep Off-Road Group, many off-road enthusiasts prefer a balance that allows for both stability and traction.

6. Aesthetic Preferences: Aesthetic preferences play an important role in rim selection. Some drivers prioritize the look of larger rims for a more aggressive stance. Smaller rims can provide a classic or understated appearance. Market research from AutoTrader shows that aesthetics can heavily influence consumer decisions in aftermarket wheel purchases.

7. Weight Considerations: Weight considerations are critical when selecting rim sizes. Heavier rims can negatively impact acceleration and fuel efficiency. Lighter rims improve performance but may come at a higher cost. The SAE International emphasizes that unsprung weight, which includes wheels, plays a direct role in vehicle handling and responsiveness.

By carefully evaluating these factors, vehicle owners can effectively select the appropriate rim size for their 33-inch tires, optimizing both functionality and aesthetics.

How Does Vehicle Type Influence Rim Size Selection?

Vehicle type significantly influences rim size selection. Different vehicles have unique requirements based on their design and intended use. For example, sports cars typically require larger rims. Larger rims enhance performance and improve handling. In contrast, trucks and SUVs often have smaller, stock rims. These smaller rims are suited for off-road capabilities and stability.

Next, consider the vehicle’s weight and overall dimensions. Heavier vehicles can benefit from wider rims. Wider rims distribute the weight evenly and improve traction. This is essential for vehicles that carry heavy loads or travel off-road. On the other hand, lighter vehicles often perform better with narrower rims. Narrower rims reduce weight, which can improve fuel efficiency.

Then, evaluate the tire size. Rim size must match the tire’s intended fitment. Proper rim size ensures optimal tire performance. For example, a 33-inch tire typically pairs well with 17 to 20-inch rims, depending on the vehicle type and purpose.

Finally, consider the vehicle’s intended use. If the vehicle is designed for street performance, larger rims may be preferred. If it is intended for off-road adventures, smaller rims may be necessary for better traction in challenging terrains.

To conclude, vehicle type dictates the appropriate rim size. Factors like design, weight, tire fitment, and intended use determine the best selection for optimal performance.

What Are the Implications of Off-Roading on Rim Size Choices?

The implications of off-roading on rim size choices include factors that affect performance, safety, and aesthetics when selecting rims for off-road vehicles.

1. Tire Compatibility
2. Performance Considerations
3. Aesthetic Preferences
4. Weight and Material Choices
5. Cost Implications

In evaluating these factors, it is essential to understand how each one influences the overall off-roading experience and vehicle functionality.

1. Tire Compatibility: Tire compatibility refers to the size and type of tires that fit specific rim sizes. Off-road vehicles often require wider rims to accommodate larger, more aggressive tires. A common rule is that the width of the rim should match the tire width for optimal performance. For instance, a tire width of 12 inches typically fits well on a rim width of 8 to 10 inches. According to the Tire and Rim Association (TRA), mismatch in size can lead to poor traction and damage to both the rim and tire.

2. Performance Considerations: Performance considerations include handling, stability, and traction during off-road conditions. Wider rims can improve tire contact with the ground, which enhances stability and cornering. However, they may also add weight, affecting acceleration and fuel efficiency. Research from the University of Michigan Transportation Research Institute shows that increasing rim size may enhance grip but can also lead to reduced ride comfort due to stiffer sidewalls.

3. Aesthetic Preferences: Aesthetic preferences pertain to the visual appeal and style of the vehicle. Many off-road enthusiasts prioritize the appearance of their vehicle and choose rims that complement their style. Popular options include custom designs and finishes that enhance the vehicle’s rugged image. A study by AutoPacific indicates that 65% of consumers consider the appearance of wheels as a critical factor in purchasing decisions.

4. Weight and Material Choices: Weight and material choices significantly impact vehicle handling and fuel efficiency. Lighter rims improve acceleration and reduce stress on suspension components. Materials range from steel, which is durable but heavy, to aluminum alloys that offer a balance of strength and weight. According to a report by Car and Driver, aluminum rims can reduce unsprung weight by up to 30% compared to steel, enhancing performance.

5. Cost Implications: Cost implications relate to the financial aspects of purchasing rims suitable for off-roading. High-performance rim options can be costly, particularly those made from lightweight materials or custom designs. Budget-conscious buyers might sacrifice some features for affordability. Research suggests that spending more on quality rims can lead to long-term savings in maintenance and replacement costs, as noted by Consumer Reports.

In conclusion, the choice of rim size for off-roading significantly influences the vehicle’s overall performance, aesthetics, and durability. It is essential to consider tire compatibility, performance factors, aesthetics, weight, material choices, and costs to make informed decisions.

What Are the Risks of Choosing the Wrong Rim Size for 33 Inch Tires?

Choosing the wrong rim size for 33-inch tires can lead to various risks affecting vehicle performance and safety.

1. Handling Issues
2. Tire Wear Problems
3. Reduced Fuel Efficiency
4. Aesthetic Concerns
5. Potential Damage to Suspension Components

These points highlight the potential complications that arise from selecting the incorrect rim size. Understanding these risks is vital for informed decision-making regarding tire and rim compatibility.

1. Handling Issues:
   Handling issues occur when the rim size does not match the tire size properly. An incorrect rim can lead to poor alignment, which affects steering response. Proper rim width is essential for maintaining adequate contact with the road, ensuring stability during turns. According to a study by Tire Industry Association (TIA, 2019), misaligned tires can increase the risk of accidents by up to 30%.

2. Tire Wear Problems:
   Tire wear problems can arise from using the wrong rim size. If the rim is too wide or too narrow, it can cause uneven wear across the tire’s tread. This ineffectiveness leads to a shorter tire lifespan and increased maintenance costs. The Rubber Manufacturers Association (RMA) states that uneven wear can reduce tire performance by 15% in high-stress conditions.

3. Reduced Fuel Efficiency:
   Reduced fuel efficiency is another risk attributed to improper rim size. The wrong rim size alters the tire’s rolling resistance. Higher rolling resistance requires more energy, leading to increased fuel consumption. According to the American Automobile Association (AAA), fuel efficiency can decrease by nearly 5% when tires are not correctly sized for their rims.

4. Aesthetic Concerns:
   Aesthetic concerns arise when the wrong rim size is chosen. Oversized or undersized rims can affect the overall look of the vehicle. Many vehicle owners prioritize aesthetics, and mismatched rims can lead to dissatisfaction with their vehicle’s appearance. Acknowledging this concern can help guide decisions in selecting appropriate rim sizes.

5. Potential Damage to Suspension Components:
   Potential damage to suspension components can occur when rims do not fit properly with tires. Incorrect sizing can lead to additional stress on the suspension system, causing premature wear or failure. As noted by the National Highway Traffic Safety Administration (NHTSA), under-inflated or misaligned tires, which often result from incorrect sizing, can lead to suspension issues over time.

How Can Improper Rim Sizing Affect Tire Performance?

Improper rim sizing can significantly affect tire performance by impacting handling, ride quality, and tire wear. The following details explain each key point:

• Handling: Incorrect rim size changes the tire’s contact with the road. This can lead to steering instability and unpredictable handling, particularly during cornering. Studies indicate that the optimal tire contact patch enhances grip and responsiveness (Goh, 2020).

• Ride Quality: A rim that is either too wide or too narrow can cause the tire to flex improperly. This leads to a rougher ride experience. According to research in the Journal of Mechanical Engineering, improper rim sizing increases vibrations, reducing overall comfort (Smith, 2021).

• Tire Wear: Misaligned rim sizing can promote uneven tire wear. If a tire is over or under-inflated due to incorrect rim sizing, it will wear out faster on certain edges. The National Highway Traffic Safety Administration reports that maintaining proper tire pressure and sizing can extend tire life by up to 30% (NHTSA, 2019).

• Safety: Incorrect rim sizing can cause tire blowouts or loss of control while driving. This is particularly dangerous at high speeds. The Tire Industry Association states that maintaining the right fitment is crucial for preventing accidents related to tire failure (TIA, 2022).

In summary, the impacts of improper rim sizing can lead to compromised vehicle performance, reduced comfort, higher costs due to premature replacement, and increased risks on the road.

What Are the Safety Concerns Related to Incorrect Rim Fitment?

The safety concerns related to incorrect rim fitment include a variety of serious issues that can impact vehicle performance and safety.

1. Tire blowouts
2. Poor handling and stability
3. Increased wear and tear on tires
4. Brake system malfunction
5. Misalignment issues
6. Unsuitable tire pressure
7. Suspension damage

These concerns highlight the importance of proper rim fitment for vehicle safety.

1. Tire Blowouts: Incorrect rim fitment can lead to tire blowouts. A tire that does not fit correctly on a rim may experience increased stress, potentially causing a sudden failure. According to the National Highway Traffic Safety Administration (NHTSA), tire blowouts contribute significantly to vehicle accidents.

2. Poor Handling and Stability: When rims are not fitted properly, vehicles can exhibit poor handling characteristics. This can result in a loss of control, especially during high-speed maneuvers. A study by the Institute of Transport Economics found a direct correlation between rim sizes and vehicle stability during emergencies.

3. Increased Wear and Tear on Tires: Incorrect rim sizes can accelerate tire wear. Tires that do not sit properly on the rim may wear unevenly, leading to premature replacement. Research conducted by Tire Rack demonstrated that improper fitment can reduce a tire’s lifespan by up to 30%.

4. Brake System Malfunction: The brake system can be adversely affected by poor rim fitment. Rims that interfere with brake components can lead to ineffective braking. The British Institute of Automobile Engineers has noted that improper rim sizes can obstruct brake calipers, risking brake failure.

5. Misalignment Issues: Incorrect rim fitment can cause the vehicle’s wheels to be misaligned. This misalignment leads to uneven tire wear and might affect steering precision. According to the American Automobile Association (AAA), misalignment issues stem from improper installation of wheels and can lead to costly repairs.

6. Unsuitable Tire Pressure: A rim that does not accommodate the tire correctly can lead to difficulties in maintaining proper tire pressure. According to the Tire Industry Association, incorrect tire pressure can reduce fuel efficiency and increase the risk of blowouts.

7. Suspension Damage: Incorrect rims can also stress the suspension system. Wheels that do not fit properly can lead to shocks and struts being overworked, which can cause long-term damage to the suspension components, according to a report by Automotive Engineering International.

These safety concerns emphasize the necessity for proper rim fitment to enhance vehicle safety and maintain optimal performance.

What Tools Can Help You Determine the Ideal Rim Size for 33 Inch Tires?

To determine the ideal rim size for 33-inch tires, you can use several tools and guidelines.

1. Manufacturer’s recommendations
2. Tire size guides
3. Online tire calculators
4. Mechanical fitment tools
5. Vehicle-specific forums and communities

The right tools can enhance your understanding of proper rim sizing, which is important for safety and performance.

1. Manufacturer’s Recommendations:
   Using the manufacturer’s recommendations for rim size is crucial. It provides specific fitment details based on the tire design and vehicle specifications. Tire manufacturers, like Michelin or Goodyear, often include ideal rim width ranges in their product literature. For instance, a 33-inch tire typically fits on rims sized between 15 to 20 inches, depending on the exact model and intended use.

2. Tire Size Guides:
   Tire size guides offer detailed information about rim sizes for different tire dimensions. These guides typically include visual aids as well. For example, the Tire and Rim Association (TRA) publishes charts that provide standardized measurements. These measurements indicate which rim sizes correspond to various tire sizes.

3. Online Tire Calculators:
   Online tire calculators are tools that help you input your tire measurements. They generate compatible rim sizes automatically. Websites like Tire Rack and Discount Tire offer user-friendly interfaces. You can select your tire size and view suggested rim sizes conveniently.

4. Mechanical Fitment Tools:
   Mechanical fitment tools, like tire pressure gauges and calipers, help check the physical space available on your vehicle’s wheel well. These tools assess clearance and fitment across your suspension and brake components. Using them carefully can ensure the new rims and tires do not affect vehicle handling.

5. Vehicle-Specific Forums and Communities:
   Vehicle-specific forums and online communities can provide personalized advice and experiences. Enthusiasts share fitment details and recommendations on rim sizes and tire types that worked for their vehicles. This crowd-sourced knowledge can be invaluable, especially for niche or modified vehicles. For instance, forums dedicated to Jeep or truck modifications often feature threads on ideal rim sizes for large tires.

Using these tools can help ensure that you select the appropriate rim size for your 33-inch tires for optimal performance and safety.

Which Online Calculators Are Available for Rim Size Selection?

Various online calculators are available for selecting rim sizes, particularly for tires like the 33-inch variants.

1. Tire Size Calculators
2. Rim Width Calculators
3. Bolt Pattern Calculators
4. Tire and Wheel Fitment Tools
5. Conversion Calculators

These tools help ensure compatibility between tires and rims while considering various factors.

1. Tire Size Calculators:
   Tire size calculators assist users in determining the appropriate rim size for specific tire dimensions. These calculators require input on existing tire size, which in this case is 33 inches. Users can find their recommended rim size range based on tire specifications.

2. Rim Width Calculators:
   Rim width calculators help users determine the optimal width for rims based on tire size. For 33-inch tires, these tools suggest rim widths that allow for proper tire contact with the road. Choosing an appropriate width can influence vehicle handling and comfort.

3. Bolt Pattern Calculators:
   A bolt pattern calculator helps drivers select rims that fit their vehicle’s wheel hubs. It identifies compatible rim bolt patterns for 33-inch tires, ensuring wheels can be securely attached. This is crucial for vehicle safety and performance.

4. Tire and Wheel Fitment Tools:
   Fitment tools assess whether tires will fit a vehicle without causing issues such as rubbing against the fender or suspension components. These calculators allow users to input vehicle data and verify compatibility with 33-inch tires.

5. Conversion Calculators:
   Conversion calculators are useful for those changing from standard to metric measurements. They allow users to input existing rim measurements and receive results in different units, making it easier to select the right rim size for 33-inch tires, especially when comparing international sizes.

In summary, these online calculators provide a comprehensive approach to selecting the right rims for 33-inch tires, ensuring proper fitment, safety, and performance.

What Are the Benefits of Using Properly Fitting Rims for 33 Inch Tires?

The benefits of using properly fitting rims for 33-inch tires include improved safety, enhanced performance, and better tire longevity.

1. Safety: Proper fitting rims reduce the risk of tire blowouts and enhance overall vehicle stability.
2. Performance: Well-fitted rims contribute to better handling and traction on various terrains.
3. Tire Longevity: Correct rim dimensions minimize uneven wear on tires, extending their lifespan.
4. Fuel Efficiency: Proper fit can improve aerodynamics, potentially enhancing fuel economy.
5. Aesthetic Appeal: The right rims can enhance the visual appeal of a vehicle.

These points underline the importance of rim selection for performance and safety.

1. Safety: Properly fitting rims for 33-inch tires significantly enhance safety. A rim that does not fit correctly can lead to tire blowouts due to improper seating. According to the National Highway Traffic Safety Administration (NHTSA), maintaining the correct tire and rim fitment is essential for preventing accidents attributed to tire failure. Furthermore, stability during turns and stops is improved with proper rim fitment, reducing the likelihood of loss of control.

2. Performance: Using rims that fit properly improves vehicle performance. Proper rim dimensions ensure optimal tire contact with the road. This contact enhances grip and handling, particularly in off-road scenarios where 33-inch tires are often employed. According to a study by tire manufacturer Michelin, tires that fit accurately on rims perform 10% better in braking tests than those that do not fit properly.

3. Tire Longevity: Correct rim specifications contribute to tire longevity. Properly fitted rims distribute weight evenly across the tire surface, preventing localized wear. The Rubber Manufacturers Association notes that uneven wear can reduce tire lifespan by up to 20%. A case study conducted by The Tire Industry Association found that tires mounted on correctly fitting rims lasted significantly longer before requiring replacement.

4. Fuel Efficiency: Fuel efficiency can be enhanced with proper rim fitment. Correctly fitting rims can aid in reducing rolling resistance. According to a report from the U.S. Department of Energy, lower rolling resistance can improve fuel economy, potentially saving drivers hundreds of dollars annually. Specifically, vehicles equipped with efficient tire and rim combinations can experience a fuel efficiency increase of up to 3%.

5. Aesthetic Appeal: The visual aspect should not be overlooked. Properly fitting rims improve the overall aesthetics of a vehicle. They create a balanced and visually appealing look that is often associated with higher quality and performance. In automotive customization communities, a thoughtful rim choice can significantly boost the vehicle’s curb appeal.

In conclusion, selecting the right rims for 33-inch tires enhances safety, performance, tire longevity, fuel efficiency, and aesthetic value. Each factor contributes to a better driving experience and investment in vehicle maintenance.

Related Post:

• What size rims fit 33 inch tires
• What size rim for 33 inch tire
• What size is 33 inch tires on 18 inch rims
• What size rim do i need for 33 inch tires
• What size tires are 33 inch with 15 inch rims