Tire Leaks Around the Rim: Causes, Fixes, and How to Seal Slow Air Leaks

Tires leak around the rim for various reasons. Rim corrosion from road salt may create small gaps at the bead-rim connection, letting air escape. Damage from hitting a curb or pothole can also cause slow leaks. Regular maintenance helps prevent these problems and keeps tires properly inflated.

Fixing these leaks typically involves a few straightforward steps. First, inspect the rim for signs of rust or damage. If corrosion is present, clean the area and apply a rust-inhibiting compound. Next, check if the tire is properly seated on the rim. If not, re-mount the tire correctly. Finally, ensure no debris is caught between the tire and rim.

To seal slow air leaks, use a tire sealant. This liquid fills small gaps and seals punctures. Inflate the tire to the recommended pressure, then add the sealant through the valve stem. Rotate the tire to distribute the sealant evenly.

In the following section, we will explore preventive measures to avoid tire leaks and enhance overall tire lifespan.

What Causes Tires to Leak Around the Rim?

Tires can leak around the rim due to several factors, including poor sealing between the tire and the rim, damage to the rim or tire bead, and corrosion.

1. Poor tire bead seating
2. Rim damage
3. Tire damage
4. Corrosion of the rim
5. Aging tires
6. Improper tire installation

Understanding these factors is essential, as each one contributes differently to tire leaks around the rim.

1. Poor Tire Bead Seating: Poor tire bead seating occurs when the tire is not correctly positioned on the rim. The tire’s bead needs to make a tight seal against the rim’s edge to hold air. If the bead is not aligned, air can escape, leading to leaks. This issue often arises during installation. A study by the Tire Industry Association indicates that improper installation can lead to frequent air loss.

2. Rim Damage: Rim damage refers to physical alterations such as bends, cracks, or dents on the wheel. When the rim is damaged, it can disrupt the seal with the tire. This can happen from hitting potholes or curbs. According to a report from the AAA, rim damage significantly increases the risk of tire leaks and can lead to additional safety issues.

3. Tire Damage: Tire damage can manifest as punctures or tears, which may occur anywhere on the tire, including near the edge. This type of damage compromises the tire integrity and leads to air escaping. The National Highway Traffic Safety Administration (NHTSA) emphasizes the importance of regular tire inspections to identify potential points of failure.

4. Corrosion of the Rim: Corrosion of the rim occurs when moisture and road salt create rust on metal rims. Rust can create rough surfaces, which disrupt the tire bead seal. The Rubber Manufacturers Association explains that maintaining clean rims is crucial to prevent air loss.

5. Aging Tires: Aging tires lose elasticity as the rubber deteriorates over time, which can contribute to air leakage. Older tires may not seal as effectively against the rim. The Tire Aging Task Force has studied this phenomenon, recommending periodic replacements for safety.

6. Improper Tire Installation: Improper tire installation can lead to inadequate air retention. Poorly fitted tires may not align snugly with the rim, resulting in leaks. Professional installation is recommended to ensure proper fitment and sealing, as noted by the Tire Retread Information Bureau.

Being aware of these causes enables better tire maintenance and proactive measures to reduce the likelihood of air leaks around the rim.

How Does Wheel Corrosion Lead to Tire Leaks?

Wheel corrosion leads to tire leaks through a series of interconnected processes. First, the wheel, often made of metal, can develop rust and pitting due to exposure to moisture and road salt. This corrosion damages the wheel’s surface. Second, the damaged surface can create gaps or holes between the tire and the wheel rim. These gaps allow air to escape from the tire.

Next, when a tire loses air, drivers may experience decreased handling and stability. This decrease occurs because the tire can no longer maintain proper pressure. Furthermore, the compromised wheel structure can lead to uneven wear on the tire, exacerbating the leak over time.

Finally, if the leak continues, it may result in a flat tire. Regular inspections of both the wheels and tires can prevent the progression of corrosion and subsequent leaks. By keeping wheels clean and protected from moisture, vehicle owners can help maintain tire integrity and performance.

What Impact Does Improper Tire Installation Have on Rim Leaks?

Improper tire installation can significantly lead to rim leaks. This occurs when tires are not seated correctly on the rim, causing air to escape.

1. Incorrect seating of the tire bead
2. Damaged rim during installation
3. Use of incompatible tire and rim sizes
4. Improper inflation pressure after installation
5. Neglecting to check for debris or imperfections on the rim

These factors not only contribute to rim leaks but also affect overall tire performance and safety. Understanding each aspect can help identify preventable issues.

1. Incorrect seating of the tire bead: Incorrect seating refers to the tire bead not fitting snugly against the rim. The bead is the inner edge of the tire that should make an airtight seal with the rim. If the bead is misaligned during installation, it can create gaps. According to a study by Tire Research International in 2021, approximately 30% of tire leaks are attributed to improper bead seating. This misalignment can allow air to seep out, resulting in slow leaks.

2. Damaged rim during installation: Damaging the rim can happen due to improper tools or excessive force during installation. A small dent or bend can compromise the seal between the tire and rim. The National Highway Traffic Safety Administration (NHTSA) reports that damaged rims are a common issue in tire installations, leading to increased risks of air loss. In an observed case, a dented rim led to a 20% drop in tire pressure over a week.

3. Use of incompatible tire and rim sizes: Using mismatched tire and rim sizes can prevent a proper fit. Tires must match the rim size specified by the vehicle manufacturer. Tire size incompatibility can create gaps, allowing air to escape. According to the Tire and Rim Association, mismatched sizes can lead to a failure rate of up to 15% for tire installations. This aspect underscores the importance of checking specifications before installation.

4. Improper inflation pressure after installation: Inadequate or excessive inflation pressure can affect tire performance and lead to leaks. Tires need to be inflated according to manufacturer instructions. Overinflation can stretch the tire and cause it to fail, while underinflation can put extra stress on the rim. A study by the Rubber Manufacturers Association in 2020 indicated that 25% of vehicles operate with incorrect tire pressure, significantly increasing the risk of leaks and blowouts.

5. Neglecting to check for debris or imperfections on the rim: Before installation, any debris or imperfections on the rim should be cleared. If left unchecked, these irregularities can prevent the tire from sealing properly. A clean rim surface is essential for maintaining air pressure. According to industry experts, ignoring this step can lead to tire pressure loss, which could affect vehicle safety and performance.

By understanding these impacts, one can enhance tire installation practices and reduce the likelihood of rim leaks.

What Are the Signs of Slow Air Leaks in Tires?

The signs of slow air leaks in tires include gradual loss of tire pressure, uneven wear on tire treads, visible damage to the tire, and a noticeable drop in fuel efficiency.

1. Gradual loss of tire pressure
2. Uneven wear on tire treads
3. Visible damage to the tire
4. Notable drop in fuel efficiency

Understanding these signs is crucial for vehicle safety and performance. Each sign often reflects underlying issues that, if left unaddressed, can lead to more serious problems.

1. Gradual Loss of Tire Pressure:
   Gradual loss of tire pressure is a clear sign of a slow air leak. Tires naturally lose air over time, but a significant and consistent drop in pressure indicates a potential leak. Regularly checking tire pressure can help identify this issue. An example is a study published by the National Highway Traffic Safety Administration, which states that 45% of drivers do not check their tire pressure regularly. This can lead to tires operating at lower than optimal pressure, affecting safety and fuel efficiency.

2. Uneven Wear on Tire Treads:
   Uneven wear on tire treads is another indication of slow leaks. This wear pattern can occur when a tire is under-inflated due to air loss. Under-inflated tires can cause more friction on the road, leading to faster deterioration. According to a report by Bridgestone, properly inflated tires can improve fuel efficiency by up to 3%. Hence, uneven tread wear can not only signal a leak but also impact fuel costs.

3. Visible Damage to the Tire:
   Visible damage to the tire can include cracks, punctures, or holes. These physical indicators may be linked to slow leaks. A visual inspection can reveal such damage. The Rubber Manufacturers Association advises that any visible damages should be assessed by a professional. Ignoring these signs can lead to blowouts or more extensive damage, which could jeopardize driver safety.

4. Notable Drop in Fuel Efficiency:
   A notable drop in fuel efficiency can be a consequence of slow air leaks. Under-inflated tires create more rolling resistance, which requires more energy. According to the U.S. Department of Energy, under-inflated tires can reduce fuel efficiency by 0.2% for every 1 psi drop in the average pressure of all tires. Therefore, noticing a decrease in miles per gallon may indicate leaking tires.

Recognizing and addressing slow air leaks through proactive maintenance is essential for vehicle safety and performance. Regular inspections and tire pressure checks can prevent these issues from escalating.

How Can You Identify a Slow Leak Around the Rim?

You can identify a slow leak around the rim by visually inspecting for damage, listening for hissing sounds, and applying soapy water to check for bubbles.

Visual inspection includes examining the tire rim for any dents, cracks, or corrosion. Damage can create gaps that allow air to escape. Listening for hissing sounds helps to detect air escaping from small openings. This method works best in a quiet environment. Applying soapy water around the rim can reveal bubbles that indicate a leak. The soap traps air, causing bubbles to form at the leaking spot.

Another effective method is to submerge the tire in water, if feasible. Air escaping will create bubbles, clearly showing the leak. Regularly inspecting tire pressure is also essential. Under-inflated tires often indicate a leak, as they lose pressure more quickly. The National Highway Traffic Safety Administration recommends checking tire pressure monthly for safety and efficiency.

Using these techniques, you can effectively identify slow leaks around the rim and address them promptly to maintain tire performance and safety.

What Symptoms Indicate a Need for Tire Inspection?

The symptoms that indicate a need for tire inspection include irregular wear patterns, loss of pressure, vibrations while driving, and visible damage such as cracks or bulges.

1. Irregular wear patterns
2. Loss of pressure
3. Vibrations while driving
4. Visible damage such as cracks or bulges
5. Poor handling or traction

Recognizing these symptoms is essential for maintaining vehicle safety and performance.

1. Irregular Wear Patterns: Irregular wear patterns on tires occur when the tread wears unevenly across the tire surface. This can result from misalignment, improper inflation, or suspension issues. According to a study by the Tire Industry Association, properly inflated tires can last up to 12,000 miles longer. Regular checks can help spot these patterns early and prevent further tire damage and safety risks.

2. Loss of Pressure: Loss of tire pressure can stem from punctures, valve stem leaks, or changes in temperature. The National Highway Traffic Safety Administration (NHTSA) states that even a small pressure drop can significantly impact tire performance, leading to reduced fuel efficiency and increased tire wear. Regular pressure checks are crucial, especially during seasonal temperature changes.

3. Vibrations While Driving: Vibrations felt in the steering wheel or throughout the vehicle can indicate tire imbalance or damage. According to the Tire Rack, unbalanced tires can cause uneven tire wear and affect vehicle handling and safety. Addressing such vibrations promptly can ensure a smoother ride and maintain vehicle performance.

4. Visible Damage Such as Cracks or Bulges: Visible damage includes cracks, cuts, or bulges in the tire sidewall. This damage can compromise tire integrity and lead to blowouts. The Rubber Manufacturers Association stresses inspecting tires for external damage, especially before long trips. Tires with visible damage should be replaced immediately to enhance safety.

5. Poor Handling or Traction: Poor handling and traction can signal issues with tire tread depth or wear. The NHTSA recommends checking tread depth regularly using the penny test. If the tread is worn down to insufficient depth, it may struggle to grip the road, increasing accident risk. Understanding the signs of decreased traction is vital for safe vehicle operation.

What Are the Best Methods to Fix Tire Leaks Around the Rim?

To fix tire leaks around the rim, several effective methods can be employed.

1. Tightening the Wheel Nut
2. Cleaning the Rim and Tire Bead
3. Using Tire Sealant
4. Rim Repair or Replacement
5. Professional Inspection

Each method presents its advantages and potential drawbacks. While some might prioritize cost-effective solutions, others might advocate for professional intervention to ensure a safer and longer-lasting fix.

1. Tightening the Wheel Nut:
Tightening the wheel nut can often address minor leaks that occur due to loose fittings. When the wheel nut is not secured properly, it can create small gaps that lead to air escaping. Regular maintenance and checking of tire fittings can reduce the chances of leaks and improve safety.

2. Cleaning the Rim and Tire Bead:
Cleaning the rim and tire bead involves removing dirt, debris, and corrosion that may hinder a proper seal. A clean surface ensures that air does not escape from the interface between the tire and rim. Using a wire brush or sandpaper, you can scrub the rim edge before reseating the tire.

3. Using Tire Sealant:
Using a tire sealant is a quick remedial action for slow tire leaks. These products work by coating the inside of the tire, sealing cracks and punctures as they occur. However, sealants may not work for larger or structural leaks and could require future removal of the tire.

4. Rim Repair or Replacement:
Rim repair or replacement is necessary when damage causes persistent leaks. Bent or cracked rims can compromise the tire’s ability to hold air. Professionals can assess the rim’s integrity and determine if repair is viable or if a replacement is required.

5. Professional Inspection:
Professional inspection is crucial if the leak persists. Tire specialists can identify hidden issues and provide solutions that ensure safety and functionality. They have access to tools and techniques that may not be available for home repair, ensuring a thorough assessment.

In summary, addressing tire leaks around the rim can involve several methods, depending on the severity of the leak and the condition of the tires. Each option has unique advantages, and careful consideration should guide the choice of fix.

How Can You Perform a DIY Tire Leak Repair?

You can perform a DIY tire leak repair by locating the leak, cleaning the area, applying a patch or sealant, and re-inflating the tire.

To achieve a successful tire leak repair, follow these detailed steps:

1. Locate the Leak:
   – Inspect the tire carefully for punctures or damage.
   – Use soapy water to identify slow leaks; bubbles will form at the leak site.
   – A study by the National Highway Traffic Safety Administration (NHTSA) found that many tire failures stem from small punctures (2019).

2. Clean the Area:
   – Remove any dirt or debris from the punctured area.
   – Use a wire brush to clean the surface effectively so the patch or sealant adheres properly.
   – Cleaning is crucial because a dirty surface can lead to patch failure.

3. Apply a Patch or Sealant:
   – Choose a tire repair kit that includes a proper patch or a sealant designed for tire repairs.
   – For traditional patches, press firmly over the puncture and ensure it adheres well to the tire.
   – Sealants can be injected into the tire; they work by filling the puncture and sealing as the tire rotates. Research by tire manufacturers shows that effective sealants can stop leaks effectively if applied correctly (Tire Industry Association, 2020).

4. Re-Inflate the Tire:
   – After allowing the patch or sealant to set for the recommended time, use a tire pump to re-inflate the tire to the manufacturer’s recommended pressure.
   – This information is typically found on a sticker inside the driver’s door or in the vehicle’s manual. Proper pressure is essential for tire performance and longevity.

By following these steps, you can effectively repair a tire leak and reduce the chance of further tire damage. Always check the repair after driving to ensure that it holds up.

When Should You Consider Professional Tire Repair Services?

You should consider professional tire repair services when you notice specific issues with your tires. First, if you find a puncture or visible damage, such as cuts or bulges, it is crucial to seek professional help. Second, if your tire pressure frequently drops, this may indicate leaks that need expert assessment. Third, if you experience unusual vibrations or handling issues while driving, a professional can diagnose any underlying tire problems. Additionally, if your tire tread is worn down excessively, a professional can recommend repair or replacement to ensure safety. Finally, if you are unsure about the condition of your tires, consulting a tire specialist can provide peace of mind and ensure your vehicle remains safe on the road. Taking these steps helps maintain your vehicle’s performance and your personal safety.

What Are the Effective Ways to Seal Slow Air Leaks in Tires?

Effective ways to seal slow air leaks in tires include both temporary and permanent solutions.

1. Tire Sealant
2. Tire Repair Kits
3. Professional Patching
4. Bead Sealing
5. Air Inflation with Sealant
6. Replacement of Damaged Tires

These methods offer various solutions to tire leaks, each with its own advantages and limitations. The effectiveness and appropriateness of each option can depend on factors such as the size of the leak, the tire’s condition, and whether a quick fix or a long-term solution is desired.

1. Tire Sealant:
   Tire sealants consist of sticky substances that fill punctures and seal leaks. This method works best for small punctures and can provide a temporary fix while allowing the tire to remain inflated. According to a study by Tire Review in 2021, sealants can effectively seal holes up to 1/4-inch in diameter. Regular check-ups are essential to ensure the sealant remains effective over time.

2. Tire Repair Kits:
   Tire repair kits include tools and materials needed to fix leaks. These kits usually contain plugs, patches, and tools for inserting the plugs. They empower drivers to handle minor repairs at home. A survey by Consumer Reports in 2022 noted that 78% of users found tire repair kits helpful for quick fixes, but proper knowledge of their use is vital.

3. Professional Patching:
   Professional patching involves removing the tire from the rim and applying a rubber patch to the inside of the tire. This method offers a durable repair option, especially for punctures. According to the Rubber Manufacturers Association, properly patched tires can maintain their integrity and performance when repaired by certified professionals.

4. Bead Sealing:
   Bead sealing involves applying a special adhesive around the tire bead where it meets the rim, preventing air from escaping. This method addresses leaks caused by improper seating or corrosion at the bead. In 2020, the American Tire Dealers Association stated that bead sealing could prolong the life of tires that would otherwise be deemed unrepairable.

5. Air Inflation with Sealant:
   Some air compressors can simultaneously inflate tires and add sealant to address slow leaks. While this solution offers convenience, it may only be effective for minor leaks. Companies like Slime report that their air inflators combined with sealants provide a practical solution for emergency situations, but they caution that this is not a substitute for professional repairs.

6. Replacement of Damaged Tires:
   If a tire is beyond repair, replacement may be necessary. This is especially true if structural integrity is compromised due to sidewall damage or long-term air loss. The National Highway Traffic Safety Administration advises inspecting the tire thoroughly and replacing it when safety becomes an issue.

Which Products or Techniques Are Best for Sealing Tire Leaks?

The best products and techniques for sealing tire leaks include tire sealants, patch kits, and professional tire repairs.

1. Tire sealants
2. Patch kits
3. Professional tire repairs

To understand these sealing options better, here are detailed explanations for each type.

1. Tire Sealants: Tire sealants are liquids that fill punctures automatically as air escapes from the tire. When a sharp object punctures the tire, the sealant flows to the puncture site and forms a flexible seal. According to a study by the Rubber Manufacturers Association, sealants can effectively repair tire punctures up to a quarter inch in diameter. Popular sealants include Slime and Fix-a-Flat. These products are generally easy to use and can provide a temporary solution for small leaks.

2. Patch Kits: Patch kits contain adhesive patches that cover punctures manually. Users first remove the tire from the rim. Next, they clean the area around the puncture, apply adhesive, and place the patch over the opening. This method can be a cost-effective and reliable way to seal leaks. The AAA advises that patch kits should be used in conjunction with professional inspections to ensure a proper seal and long-term safety.

3. Professional Tire Repairs: Professional tire repairs involve taking a tire to a mechanic who will remove it from the rim, assess the damage, and apply either a patch or a plug from the inside. This method is recommended for leaks that cannot be resolved with sealants or patch kits. The Tire Industry Association states that proper professional repair can extend the life of a tire significantly when done correctly, making it a wise investment for safety and cost efficiencies.

How Often Should You Check for Tire Leak Repairs?

You should check for tire leak repairs regularly. Inspect your tires at least once a month. Pay particular attention to changes in tire pressure. If you notice a significant drop in pressure, investigate further. Examine the rim, tire sidewall, and tread for visible damage or cracks. If you frequently drive on rough roads, inspect your tires more often. Always check your tires before long trips, as this proactive approach helps prevent unexpected issues. Additionally, monitor tire performance while driving for any signs of leaks, such as vibrations or unusual noises. Quick detection and repair of leaks can improve safety and extend tire life.

When Should You Seek Professional Help for Tire Rim Leaks?

You should seek professional help for tire rim leaks when you notice consistent air loss, visible damage to the rim, or when you experience difficulty maintaining tire pressure. First, identify consistent air loss. If your tires require frequent inflation, this indicates a leak that may need professional attention. Next, inspect the rim for visible damage, such as bends, cracks, or corrosion. These issues can compromise the seal between the tire and the rim, leading to leaks. Additionally, if you are unable to maintain proper tire pressure despite repairs, this situation suggests a persistent problem that professionals can diagnose. Lastly, if you hear hissing sounds or notice air escaping, it is a clear sign of a leak. Addressing these indicators promptly can enhance your vehicle’s safety and performance.

What Signs Indicate a Professional Inspection is Necessary?

A professional inspection is necessary when certain signs indicate potential issues with a property or system. Recognizing these signs can help prevent further problems and ensure safety.

1. Visible Water Damage
2. Mold Growth
3. Unusual Noises
4. Electrical Issues
5. Cracks in Walls or Foundation
6. Pest Infestation
7. Poor Air Quality

Identifying these signs can help homeowners or property managers make informed decisions. Below is a detailed explanation of each sign indicating that a professional inspection is warranted.

1. Visible Water Damage:
   Visible water damage indicates potential leaks or moisture problems. This may appear as stains on ceilings and walls, bubbling paint, or warped flooring. Water damage can lead to more severe structural issues if not addressed. The Insurance Institute for Business & Home Safety (IBHS) emphasizes that even minor water stains could hint at ongoing leaks that require inspection. For example, a slow leak in a roof can deteriorate structural integrity over time.

2. Mold Growth:
   Mold growth is a clear sign that moisture levels are too high in a property. Mold thrives in damp environments, and its presence can lead to health issues such as respiratory problems. The Centers for Disease Control and Prevention (CDC) states that mold can release allergens and irritants. A professional inspection can identify hidden mold in walls or ducts, ensuring the home is safe for occupants.

3. Unusual Noises:
   Unusual noises such as creaks, pops, or banging sounds often indicate underlying problems in a property. These noises can stem from settling, plumbing issues, or even electrical problems. According to the National Fire Protection Association (NFPA), persistent electrical noises could signal faulty wiring that requires immediate expert evaluation to prevent fire risks.

4. Electrical Issues:
   Electrical issues, such as flickering lights or frequent circuit breaker trips, suggest underlying electrical system problems. Faulty wiring or overloaded circuits can increase the risk of fire. The National Electrical Code (NEC) recommends that any persistent electrical problem be assessed by a qualified electrician to ensure safety and compliance with local regulations.

5. Cracks in Walls or Foundation:
   Cracks in walls or the foundation are significant indicators of structural issues. Small hairline cracks can be normal due to settling, but larger cracks may suggest serious problems. The American Society of Home Inspectors (ASHI) advises monitoring the size and direction of these cracks. An inspection can determine if repairs are necessary for safety and structural integrity.

6. Pest Infestation:
   Evidence of pest infestation, such as droppings or nests, indicates a need for inspection. Common pests like termites can cause severe damage to wooden structures if left unchecked. According to the National Pest Management Association (NPMA), regular inspections can prevent significant property damage. A professional pest inspector can assess the extent of the infestation and recommend appropriate treatments.

7. Poor Air Quality:
   Poor air quality, accompanied by unusual odors or persistent allergies, indicates potential indoor air quality issues. According to the Environmental Protection Agency (EPA), sources can include mold, dust, or chemical pollutants. An air quality inspection can identify and mitigate sources of contamination, improving health and comfort in the home.

In conclusion, recognizing these signs is crucial for maintaining safety and property health. Addressing these issues promptly through professional inspection can prevent costly repairs and ensure a safe living environment.

How Can a Professional Diagnose and Repair Rim Leaks?

A professional can diagnose and repair rim leaks using visual inspections, water tests, and appropriate sealants or repairs. This process helps ensure proper tire function and safety.

Professionals follow several key steps during diagnosis and repair:

1. Visual inspection: Technicians visually examine the rim and tire. They look for signs of damage, corrosion, or visible gaps where air may escape. Often, leaks occur at the bead area where the tire meets the rim.

2. Water test: To identify slow leaks, professionals may submerge the wheel in water or apply soapy water to the rim. The appearance of bubbles indicates escaping air. This test provides a clear location for the leak.

3. Cleaning and preparation: Once identified, technicians clean the rim thoroughly. They remove dirt, debris, or old sealant that may prevent a proper seal. A clean surface is essential for effective repairs.

4. Applying sealants: Professionals may use a tire sealant specifically designed for rim leaks. These sealants fill gaps and create a barrier against air loss. They are often easy to apply and can provide a temporary or permanent solution.

5. Rim straightening: In some cases, bent rims can cause leaks. Technicians may use specialized tools to straighten the rim. This process aims to ensure a proper seal between the tire and the rim.

6. Reinstallation and testing: After repairs, the technician will reinstall the tire and inflate it to the recommended pressure. They will monitor the tire for a period to confirm that air loss has stopped.

Following these steps can effectively diagnose and repair rim leaks. Regular maintenance helps prevent leaks and ensures tire longevity.

Related Post:

• How to seal tire leak around rim
• How to fix slow leak around tire rim
• Why is my tire leaking air around the rim
• How to fix air leak around rim of spare tire
• Why are white rim tires not around